Be a Nautical ADVENTURER!!
2016/08/15

SoloSkiff Kayak

$1,850.00

Your Solo Ski is made by a process called rotational molding. e entire hull is all one piece. It is made of polyethylene, one layer of outer plastic resin that contains the color, and a layer inside that is foamed. is multi layer process greatly increases the strength of your hull while at the same time providing a margin of safety against cracks. With proper care the hull will last for many years of use. e multi layer process also greatly aids in otation. Your Solo Ski has the foam layer on the entire inside surface. If you cut a Solo Ski in pieces and put each piece in the water they will all oat. is provides a level of safety you do not get with any single layer kayak. Your Solo Ski also has foam blocks installed for added otation and safety. Do not remove these blocks of foam.

Clear selection
Compare

Your Solo Ski is made by a process called rotational molding. e entire hull is all one piece. It is made of polyethylene, one layer of outer plastic resin that contains the color, and a layer inside that is foamed. is multi layer process greatly increases the strength of your hull while at the same time providing a margin of safety against cracks. With proper care the hull will last for many years of use. e multi layer process also greatly aids in otation. Your Solo Ski has the foam layer on the entire inside surface. If you cut a Solo Ski in pieces and put each piece in the water they will all oat. is provides a level of safety you do not get with any single layer kayak. Your Solo Ski also has foam blocks installed for added otation and safety. Do not remove these blocks of foam.

SPECIFICATIONS

  • Length 14’5″
  • Width 41″
  • Capacity 400 Lbs
  • Max. Hp 5Hp
  • Power Outboard / Electric
  • Construction  Polyethylene
  • Weight 150 Lbs.

FEATURES

  • BOW HANDLE – FOR LIFTING THE HULL ONLY BOW – FRONT OF BOAT
  • ACCESS PORT LOCATION – ALLOWS INSTALLATION OF OP- TIONAL AFTER-MARKET SCREW IN PORT.
  • COOLER / STORAGE – CAN BE USED AS A COOLER, OR DRY STORAGE. DO NOT STORE ELECTRONIC EQUIPMENT IN THIS AREA AS NO GUARANTEE IS MADE THAT IT WILL STAY DRY.
  • COOLER DECK DRAINS – IN COMBINATION WITH THE COOLER LID (NOT SHOWN) KEEPS WATER OUT OF COOLER DURING NORMAL USE.
  • COOLER THRU BOTTOM DRAIN – ALLOWS DRAINING / RINSING OF COOLER
  • ROD TUBES- FOR ROD TIP STORAGE / TUBES ARE CAPPED / SEALED SO WATER CAN’T GET IN HULL.
  • COCKPIT – AREA FOR STANDING, GETTING IN AND OUT OF BOAT, AND KNEELING TO GET INTO STORAGE AREAS.
  • SEAT / STORAGE HATCH – FOR SITTING, AND ACCESS TO INTERNAL HULL STORAGE
  • TRANSOM – FOR MOUNTING ELECTRIC TOLLING MOTOR OR OUTBOARD MOTOR.
  • GRAB BAR – FOR LIFTING SOLO DURING LOADING – NOT TO BE USED FOR STORAGE, OR HANGING THE BOAT.

YOUR SOLO SKIFF CAN BE POWERED BY…

1. OUTBOARD MOTORS (5Hp Maximum)
2. ELECTRIC TROLLING MOTORS (30-40Lb rust is plenty)
3. ELECTRIC OUTBOARDS (TORQEEDO 1003)
4. MANUAL POWER – SOLO SKIFF ROWING KIT, SUP/KAYAK PADDLE, PUSH POLE

color

brown, grey, Sea Foam

Reviews

There are no reviews yet.

Be the first to review “SoloSkiff Kayak”