BerleyPro Orb
The BerleyPro Orb is a 12v, 3 piece collapsible light perfect for that boat or kayak. With IP68 LEDs orientated at 360 degrees and angled over head this can be used as either an anchor light or permanent running light on your kayak. Our specific selection of LEDs are bright enough to let you land that tricky fish at night or setup your gear. This light runs on 12v so no more forgetting to charge your battery or paying for expensive smaller batteries as this can be connected in parallel with your fish finder.
This light is easy to install with only 2 wires needing to be connected and it comes with everything you need.
This light includes:
Super bright and waterproof IP68 LEDs
Extremely low current draw at 310mA
Railblaza mounting E port
Stainless steel fasteners
Waterproof fuse holder
3A fuse
3m of twin core marine cable
3 Piece 1.1m tall collapsible light
Glue lined heat shrink for installation
$149.00Add to cart
RailBlaza C-Tug SandTrakz
When it comes to moving loads over soft sand, wider wheels are not necessarily better. Bulldozers and military tanks use long tracks, reducing the chance of them digging in. SandTrakz puncture free wheels mimic this track system, the outer rim compresses when in use giving a longer track length. On soft sand this reduces how hard you have to pull to move your cart by more than half compared to standard puncture free Kiwi Wheels*! In fact the SandTrakz system is so effective we think it’s better than balloon wheels!
Half the effort*
Puncture free
Fits inside hatches
Whilst they are designed to make life easier on soft surfaces, SandTrakz wheels are great on hard surfaces. Because C-TUG SandTrakz are designed to compress they act like suspension on hard surfaces, making for easy transition from soft to hard surfaces.
$194.99Add to cart
RailBlaza C.W.S Bag
Keeping your RAILBLAZA gear together and Losing small parts on a boat, kayak or even in the shed has its challenges. Washing it down one piece at a time takes ages.
Got a removable sounder, how do you keep those cables safe and tidy?
RAILBLAZA have the answer with the new C.W.S. Bag. This mesh bag is designed to not only keep your gear tidy and easy to carry, but has the advantage of being able to wash the gear while still in the bag, and then hang it out to dry.
Big enough to hold your sounder, transducer and all the cables, or maybe 2 rod holders, a mobi and light pole. You’ll always know where your things are, and can be certain the small bits aren’t lost in the bottom of the locker or boot of the car.
$13.99Add to cart
RailBlaza Camera Boom 600 R-Lock
The RAILBLAZA Camera Boom 600 R-Lock is the best GoPro mount for your kayak, canoe, bass boat, yacht and/or other marine vessel.
It’s not going to end well if you take a selfie stick out on the water, which is exactly why we decided to make the extremely versatile Camera Boom 600. The RAILBLAZA Camera Boom 600 R-Lock is the best GoPro mount for your kayak, canoe, bass boat, yacht and/or other marine vessel.
Quality New Zealand made from high quality, waterproof and UV proof materials
Easy single-handed adjustment using R-Lock friction joints
R-Lock swivel joints can be locked, adjustable knuckle joint
Unscrew GoPro mount to use ¼ 20” screw
Light-weight and rigid with 5 adjustment axes
Quick release with a flick of the StarPort lock
Boom breaks into three pieces, for different mount heights
This innovative GoPro mount will hold your camera and capture the action for you! It can be used on kayaks, bass boats, sailboats, inflatables, motorcycles and any other type of vehicle. Compatible with any RAILBLAZA mount, this is the most versatile camera mount on the market.
There’s a reason why this fully adjustable GoPro extension mount is so popular! Like all RAILBLAZA products, this mounting extension arm is super easy to install and is the ideal way to mount your GoPro Hero 4, GoPro Hero 5 and all other brands of action cams. It certainly makes capturing those niggly wide shots a breeze while you’re on the water. It is one of the most popular GoPro mounting accessories on the market – it’s just like having an extra long GoPro selfie stick on steroids, you can literally mount it anywhere.
It should be called a GoPro Hero Stick or a GoPro waterproof pole, but whatever you want to call it, the RAILBLAZA Camera Boom 600 Pro Series works just beautifully. The GoPro mount can also be unscrewed to reveal a ¼ 20 thread for other camera types.
$66.99Add to cart
RailBlaza Camera Mount Adaptor
The Camera Mount Adaptor from RAILBLAZA is the safe and secure option for holding your camera or GoPro on any kayak, canoe, bass boat, yacht and more.
The RAILBLAZA Camera Mount Adaptor is an instantly portable, easy way to mount your device safely and securely anywhere you choose on your kayak, canoe, bass boat, or yacht. If you want to change your shot angle from bow to stern, vertical to horizontal, or simply to detach your camera for some hand held close ups, this is the fast and easy way move and reattach your device without hassle. Simply attach your device, and this camera mount will clip into any RAILBLAZA StarPort, SidePort, RIBPort or RailMount.
The RAILBLAZA Camera Mount Adaptor uses the universally compatible ¼ 20 thread screw which will easily attach your action camera or any device. This RAILBLAZA camera mount accessory also comes with a GoPro style tripod adapter, allowing you to mount your GoPro products or other well known digital camera brands to your kayak or boat with no troubles.
Due to the versatile nature of all RAILBLAZA accessories, the Camera Mount Adaptor is easily moved, adjusted, transported, removed or stowed in seconds according to your needs. If you need to quickly run into a store for a last minute bait or tackle emergency, it’s a quick and easy action, unclip any RAILBLAZA accessory to keep it – and your attached device – safe in the boot of your car.
$16.99Add to cart
RailBlaza Camera Mount R-Lock
Use the RAILBLAZA Camera Mount Kit to prove to your mates that you really did land that record fish, just get them to take a look at the clip from when you hauled it on board. This compact and lightweight camera holder will hold your devices securely as you record your aquatic adventures.
Quality New Zealand made from high quality, waterproof and UV proof materials
Easy single-handed adjustment using R-Lock friction joints
R-Lock swivel joints can be locked, adjustable knuckle joint
Unscrew GoPro mount to use ¼ 20” screw
Light-weight and rigid
Quick release with a flick of the StarPort lock
Top Camera Mount Adaptor is removable to make a low-profile mount
This innovative GoPro mount will hold your camera and capture the action for you! It can be used on kayaks, bass boats, sailboats, inflatables, motorcycles and any other type of vehicle. Compatible with any RAILBLAZA mount, this is the most versatile camera mount on the market.
Being adjustable to shoot at any angle as well as swivel 360 degrees, you can trust the RAILBLAZA camera mount products to securely and firmly hold your camera steady despite the pitch and roll of waves.
Quickly and easily attach and detach your GoPro or action camera into the most convenient RAILBLAZA port on your kayak, boat, yacht, farm bike, rail or almost any other surface. This Camera Mount Kit has the universally accepted ¼ 20” screw and a GoPro tripod adapter, which makes it compatible with most cameras on the market, such as GoPro products, Contour, Garmin, Sony, Panasonic, HedCam and more. The RAILBLAZA kayaking and boating accessories allow for fast and easy unclipping of your valuables in seconds to stow them safely while you’re away from your gear.
$37.99Add to cart
RailBlaza CleatPort
Now your anchor cleat can hold your favorite RAILBLAZA accessory and conserve space in a sport where space is very limited! The RAILBLAZA CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. Our new CleatPort not only gives you the option to position a cleat on the boat where you want it but also offers the ability to use that area with any of our accessories. The CleatPort is compatible with all RAILBLAZA accessories. Many people use this point for mounting their lights, rod holders, or camera mounts. Included is a unique backing plate keeping stainless fastenings isolated from aluminum decks avoiding corrosion. The CleatPort can be used on your kayak when used as a tender giving a solid tie point, whether it”s tied off the back of the boat while at anchor or to secure it to a mooring or land.
$46.99Select options
RailBlaza Clevis/Bimini Support
Connect it with a Clevis.
There are many uses for a clevis, and we’re sure you will find more uses than we can think of!
Bimini covers are a great way to stay protected from the weather, sun or rain, when out in your boat. Often it can be a hassle to fit or remove requiring tools or replacing fittings that have corroded.
Neither of these things is a problem when using the bimini clevis from RAILBLAZA, simply the quickest and most reliable way to remove or install your bimini cover.
With the RAILBLAZA Clevis/Bimini support pair and you can now click in and out of any StarPort mount. Great when you need to remove the bimini cover for those days that the casting area needs to be clear.
$15.99Add to cart
RailBlaza DrinkHold
The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water.
The only thing better than a cold drink on a hot day (or vice versa), is having one within easy reach while on your boat, PWC or kayak any time you want it. The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water. Made in New Zealand from high quality, UV proof plastic. Fit to boats, inflatables, kayaks, bass boat, yachts there’s no limit where these can be used
Made in New Zealand from high quality, UV proof plastic
Fit to boats, inflatables, kayaks, fibreglass or even put it in a sheet winch!
Fits any RAILBLAZA port, easily removed and stowed when not in use
Holds bottles, coffee mugs & glasses
The Drink Hold from RAILBLAZA is the convenient accessory to hold your cup, coffee mug, drink can or drink bottle securely. Being a RAILBLAZA product, the Drink Hold can do more than keep your beverage safe while you reel in a monster kingfish or read a chart. This universal marine cup holder is also perfect for hanging fishing lures or storing tools such as pliers.
Along with allowing you to easily move your drink to the most convenient location on your vessel, this versatile cup holder also offers the ability to be easily mounted onto a vertical or horizontal RAILBLAZA StarPort and will hold anything from drink bottles to coffee mugs. Like all RAILBLAZA StarPort accessories, the Drink Hold can be easily removed and transferred to another port or stowed away when not in use. Super easy!
If you’re looking for a drink or cup holder for your kayak, boat, canoe (or any other kind of marine vessel), then look no further than the RAILBLAZA Drink Hold.
$13.99Select options
RailBlaza Expanda Track
RAILBLAZA Expanda Track is the ultimate in versatile, surface mount tracks for light duty applications on kayaks, power boats, bass boats, ATVs and almost any other vehicle.
Expanda Track is;
Low Profile
Surface Mount
Modular
Expandable
*Made in New Zealand from high quality materials
Expanda Track will allow you to hold cameras, drink holders, mobile phones & tablets, pole holders and many other items. Simply fit the Expanda Track to any surface you like, then connect a RAILBLAZA StarPort, StarPort HD (relevant TrackMount Kit required) or MiniPort to hold your choice of accessory.
Made of fibreglass reinforced nylon the track is strong and UV resistant.
The design allows for surface mounting, without any rear access required. Included in the kit is everything you need to make a 120mm (5”) or 200mm (8”) track, or by clipping the 2 ends together you can make a compact mount which will receive the MiniPort TracMount. If you need a longer track, simply buy another kit, and make it longer by 75mm (3”) per piece.
$15.99Add to cart
RailBlaza MinPort Tracmount
Rigging your craft with RAILBLAZA accessories just got a whole lot quicker and more versatile with the MiniPort TracMount. No tools required, The MiniPort TracMount is designed to fit most existing tracks, including YakAttack, Wilderness Systems, Native Watercraft and Yak Gear.
Completely tool-less operation which is easily fitted and adjusted simply by turning the MiniPort which tightens directly in the track using our TracNut. Re-positioning in the track is as simple as turning to release the tension.
PLEASE NOTE: Designed for use in light duty applications. If using for trolling with RodHolder it must be used on the right hand (starboard) side, so that the MiniPort tightens when load comes on from a strike. If using on left hand (port) side the MiniPort will loosen when load comes on fishing rod).
$14.99Add to cart
RailBlaza NaviPack
The NaviPack Portable LED Navigation Light Kit is the perfect companion for small, tiller steered power boats, inflatables, or as an emergency nav light pack for larger vessels. In one convenient, value-for-money pack you get everything you need to comply with the legal requirements in almost every country and territory.
Supplied with three RAILBLAZA mounts, you can use the StarPort, SidePort or QuikPort, and the good news is you’ll have one of them left over. There are endless mounting possibilities.
Disassembly when you’re finished is quick and easy, and in the handy storage bag it will stow just about anywhere.
$179.99Add to cart
RailBlaza QuikPort
The RAILBLAZA QuikPort is a durable and weatherproof stick-on mount which will securely stick to your Stand Up Paddleboard (SUP), Inflatable Boat (RIB), kayak and many other vessels. The QuikPort is the perfect solution for holding your GoPro, action camera, navigation lights, phone, gas bottle or drink holder without the need to drill any holes.
Easily attach the RAILBLAZA QuikPort on virtually any surface and location you desire by using the supplied 3M VHB self-adhesive pad, or alternatively it can be glued if that’s your preference. The QuikPort is able to adhere to almost any surface and is proven to stick incredibly well to PVC, Hypalon, Fibreglass, Epoxy and more with the right preparation.
The QuikPort is designed to fit into much tighter spaces than our similar heavier duty product the RAILBLAZA RIBPort. Both are made in New Zealand from quality engineering plastics, which is ideal for both flat and slightly curved surfaces due to its partially flexible nature.
The QuikPort is ideal for a Inflatable Boat accessory mount or a Paddle Board accessory mount as many vessels such as these aren’t suitable for drilling holes, using screws or bolts. The RAILBLAZA Ports are the perfect way to deck out your gear with a huge range of accessories, making them attachable and detachable by simply snapping them into place.
$21.99Add to cart
RailBlaza RibPort
Fitting Rod holders and other accessories to RIB’s & Inflatable boats just got easier.
Now you can fit accessories like rod holders, bait boards, fish finders and more to RIB or Inflatable boats, SUPs and kayaks without hassle or messy glues. The new 3M VHB pad allows you to peel and stick the RIBPort mount, then fit any of your favorite RAILBLAZA accessories. The 3M VHB is now supplied with every RIBPort pack.
You no longer need a specialised outfitter, or to work with messy glues to install accessories to your RIB or Inflatable, with the RIBPort VHB pad you can install in the comfort of your own garage following the below instructions. Our team have run extensive trials on Hypalon, PVC & polyethylene inflatable craft and also recommend the VHB pad for use on epoxy SUP’s or surfboards.
The RIBPort can also be attached using the same glues as used to attach handles etc to RIB’s and inflatables.
$31.99Select options
RailBlaza Rod Holer II
The Rod Holder II is robust, versatile, and value for money, it will hold your rod, you choose which position.
Rotating collar helps reduce ‘strike-theft’
Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through
Fully adjustable 360° around, over 90° vertical
Easy access to reel when in position
Square-tooth adjustable tilt stops rotational slipping.
The Rod Holder II is available either as a kit complete with a StarPort, or as a Rod Holder by itself.
For spinning reels, bait casting reels, boat reels, fly reels. Allows you to fit your Rod Holder to any StarPort, SidePort, RailMount or RIBPort.
When finished fishing for the day, remove from StarPort and stow in dry place, do not store wet.
NOTE: We strongly recommend that you tether your fishing rod to the boat while in use. Loss of fishing rods while using the RAILBLAZA Rod Holder is not covered by warranty.
$24.99Add to cart
RailBlaza Side Port
The RAILBLAZA StarPort is a unique and versatile mount, if you need this versatility from a vertical surface, but require a horizontal socket, SidePort is the mount for you.
Ideally suited for gunwales of smaller tinnies, vertical cockpit wells on kayaks and any other application where you have a vertical surface, but need a horizontal StarPort.
Fitted in only minutes, and sold with all necessary stainless steel fasteners the SidePort is a fantastic mount and great value for money.
IMPORTANT: Use of petroleum based lubricants on the StarPort slide will cause failure. Silicone based products are best suited (please check contents of lubricant before using).
For more information, and mounting tips, view our installation video on this page.
MOUNTING INSTRUCTIONS:
Drill holes in surface you are mounting your SidePort to.
Position SidePort into place
Tighten nuts or screw heads to a firm tension.
– Ensure you have adequate clearance behind the surface for screw and/or bolt penetration, and that no cabling, plumbing or rigging will be adversely affected.
For further mounting information have a look at the video below.
$13.99Add to cart
