Sea Sucker Horizontal 1-Cup Holder
This is your personal cup holder – never again do you grab the wrong bottle, like the one your sea sick buddy just had his gross lips all over. It doesn’t get any simpler than this – a single cup insert held to a horizontal surface (like the top of your console) by a powerful-yet-simple-to-use SeaSucker 4.5” vacuum mount.
*Available in White.
$65.00Add to cart
BerleyPro Side Bro Pair
The Side bro is designed to hold you pliers, scissors, fish grips, small red Plano box and much more. This is a direct replacement for the Hobie® side pockets or any flat surface.
LH and RH in the Side Bros is available.
Product dimensions: 295mm Long x 105mm High x 50mm Deep
Plano box information – Plano Waterproof Stowaway 344
$89.00Add to cart
RailBlaza RibPort
Fitting Rod holders and other accessories to RIB’s & Inflatable boats just got easier.
Now you can fit accessories like rod holders, bait boards, fish finders and more to RIB or Inflatable boats, SUPs and kayaks without hassle or messy glues. The new 3M VHB pad allows you to peel and stick the RIBPort mount, then fit any of your favorite RAILBLAZA accessories. The 3M VHB is now supplied with every RIBPort pack.
You no longer need a specialised outfitter, or to work with messy glues to install accessories to your RIB or Inflatable, with the RIBPort VHB pad you can install in the comfort of your own garage following the below instructions. Our team have run extensive trials on Hypalon, PVC & polyethylene inflatable craft and also recommend the VHB pad for use on epoxy SUP’s or surfboards.
The RIBPort can also be attached using the same glues as used to attach handles etc to RIB’s and inflatables.
$31.99Select options
BerleyPro Orb
The BerleyPro Orb is a 12v, 3 piece collapsible light perfect for that boat or kayak. With IP68 LEDs orientated at 360 degrees and angled over head this can be used as either an anchor light or permanent running light on your kayak. Our specific selection of LEDs are bright enough to let you land that tricky fish at night or setup your gear. This light runs on 12v so no more forgetting to charge your battery or paying for expensive smaller batteries as this can be connected in parallel with your fish finder.
This light is easy to install with only 2 wires needing to be connected and it comes with everything you need.
This light includes:
Super bright and waterproof IP68 LEDs
Extremely low current draw at 310mA
Railblaza mounting E port
Stainless steel fasteners
Waterproof fuse holder
3A fuse
3m of twin core marine cable
3 Piece 1.1m tall collapsible light
Glue lined heat shrink for installation
$149.00Add to cart
RailBlaza Camera Mount Adapter
The Camera Mount Adaptor from RAILBLAZA is the safe and secure option for holding your camera or GoPro on any kayak, canoe, bass boat, yacht and more.
The RAILBLAZA Camera Mount Adaptor is an instantly portable, easy way to mount your device safely and securely anywhere you choose on your kayak, canoe, bass boat, or yacht. If you want to change your shot angle from bow to stern, vertical to horizontal, or simply to detach your camera for some hand held close ups, this is the fast and easy way move and reattach your device without hassle. Simply attach your device, and this camera mount will clip into any RAILBLAZA StarPort, SidePort, RIBPort or RailMount.
The RAILBLAZA Camera Mount Adaptor uses the universally compatible ¼ 20 thread screw which will easily attach your action camera or any device. This RAILBLAZA camera mount accessory also comes with a GoPro style tripod adapter, allowing you to mount your GoPro products or other well known digital camera brands to your kayak or boat with no troubles.
Due to the versatile nature of all RAILBLAZA accessories, the Camera Mount Adaptor is easily moved, adjusted, transported, removed or stowed in seconds according to your needs. If you need to quickly run into a store for a last minute bait or tackle emergency, it’s a quick and easy action, unclip any RAILBLAZA accessory to keep it – and your attached device – safe in the boot of your car.
$16.99Add to cart
RailBlaza CleatPort
Now your anchor cleat can hold your favorite RAILBLAZA accessory and conserve space in a sport where space is very limited! The RAILBLAZA CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. Our new CleatPort not only gives you the option to position a cleat on the boat where you want it but also offers the ability to use that area with any of our accessories. The CleatPort is compatible with all RAILBLAZA accessories. Many people use this point for mounting their lights, rod holders, or camera mounts. Included is a unique backing plate keeping stainless fastenings isolated from aluminum decks avoiding corrosion. The CleatPort can be used on your kayak when used as a tender giving a solid tie point, whether it”s tied off the back of the boat while at anchor or to secure it to a mooring or land.
$46.99Select options
RailBlaza Clevis/Bimini Support
Connect it with a Clevis.
There are many uses for a clevis, and we’re sure you will find more uses than we can think of!
Bimini covers are a great way to stay protected from the weather, sun or rain, when out in your boat. Often it can be a hassle to fit or remove requiring tools or replacing fittings that have corroded.
Neither of these things is a problem when using the bimini clevis from RAILBLAZA, simply the quickest and most reliable way to remove or install your bimini cover.
With the RAILBLAZA Clevis/Bimini support pair and you can now click in and out of any StarPort mount. Great when you need to remove the bimini cover for those days that the casting area needs to be clear.
$15.99Add to cart
RailBlaza C.W.S Bag
Keeping your RAILBLAZA gear together and Losing small parts on a boat, kayak or even in the shed has its challenges. Washing it down one piece at a time takes ages.
Got a removable sounder, how do you keep those cables safe and tidy?
RAILBLAZA have the answer with the new C.W.S. Bag. This mesh bag is designed to not only keep your gear tidy and easy to carry, but has the advantage of being able to wash the gear while still in the bag, and then hang it out to dry.
Big enough to hold your sounder, transducer and all the cables, or maybe 2 rod holders, a mobi and light pole. You’ll always know where your things are, and can be certain the small bits aren’t lost in the bottom of the locker or boot of the car.
$13.99Add to cart
RailBlaza DrinkHold
The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water.
The only thing better than a cold drink on a hot day (or vice versa), is having one within easy reach while on your boat, PWC or kayak any time you want it. The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water. Made in New Zealand from high quality, UV proof plastic. Fit to boats, inflatables, kayaks, bass boat, yachts there’s no limit where these can be used
Made in New Zealand from high quality, UV proof plastic
Fit to boats, inflatables, kayaks, fibreglass or even put it in a sheet winch!
Fits any RAILBLAZA port, easily removed and stowed when not in use
Holds bottles, coffee mugs & glasses
The Drink Hold from RAILBLAZA is the convenient accessory to hold your cup, coffee mug, drink can or drink bottle securely. Being a RAILBLAZA product, the Drink Hold can do more than keep your beverage safe while you reel in a monster kingfish or read a chart. This universal marine cup holder is also perfect for hanging fishing lures or storing tools such as pliers.
Along with allowing you to easily move your drink to the most convenient location on your vessel, this versatile cup holder also offers the ability to be easily mounted onto a vertical or horizontal RAILBLAZA StarPort and will hold anything from drink bottles to coffee mugs. Like all RAILBLAZA StarPort accessories, the Drink Hold can be easily removed and transferred to another port or stowed away when not in use. Super easy!
If you’re looking for a drink or cup holder for your kayak, boat, canoe (or any other kind of marine vessel), then look no further than the RAILBLAZA Drink Hold.
$13.99Select options
RailBlaza Expanda Track
RAILBLAZA Expanda Track is the ultimate in versatile, surface mount tracks for light duty applications on kayaks, power boats, bass boats, ATVs and almost any other vehicle.
Expanda Track is;
Low Profile
Surface Mount
Modular
Expandable
*Made in New Zealand from high quality materials
Expanda Track will allow you to hold cameras, drink holders, mobile phones & tablets, pole holders and many other items. Simply fit the Expanda Track to any surface you like, then connect a RAILBLAZA StarPort, StarPort HD (relevant TrackMount Kit required) or MiniPort to hold your choice of accessory.
Made of fibreglass reinforced nylon the track is strong and UV resistant.
The design allows for surface mounting, without any rear access required. Included in the kit is everything you need to make a 120mm (5”) or 200mm (8”) track, or by clipping the 2 ends together you can make a compact mount which will receive the MiniPort TracMount. If you need a longer track, simply buy another kit, and make it longer by 75mm (3”) per piece.
$15.99Add to cart
RailBlaza NaviPack
The NaviPack Portable LED Navigation Light Kit is the perfect companion for small, tiller steered power boats, inflatables, or as an emergency nav light pack for larger vessels. In one convenient, value-for-money pack you get everything you need to comply with the legal requirements in almost every country and territory.
Supplied with three RAILBLAZA mounts, you can use the StarPort, SidePort or QuikPort, and the good news is you’ll have one of them left over. There are endless mounting possibilities.
Disassembly when you’re finished is quick and easy, and in the handy storage bag it will stow just about anywhere.
$179.99Add to cart
RailBlaza QuikPort
The RAILBLAZA QuikPort is a durable and weatherproof stick-on mount which will securely stick to your Stand Up Paddleboard (SUP), Inflatable Boat (RIB), kayak and many other vessels. The QuikPort is the perfect solution for holding your GoPro, action camera, navigation lights, phone, gas bottle or drink holder without the need to drill any holes.
Easily attach the RAILBLAZA QuikPort on virtually any surface and location you desire by using the supplied 3M VHB self-adhesive pad, or alternatively it can be glued if that’s your preference. The QuikPort is able to adhere to almost any surface and is proven to stick incredibly well to PVC, Hypalon, Fibreglass, Epoxy and more with the right preparation.
The QuikPort is designed to fit into much tighter spaces than our similar heavier duty product the RAILBLAZA RIBPort. Both are made in New Zealand from quality engineering plastics, which is ideal for both flat and slightly curved surfaces due to its partially flexible nature.
The QuikPort is ideal for a Inflatable Boat accessory mount or a Paddle Board accessory mount as many vessels such as these aren’t suitable for drilling holes, using screws or bolts. The RAILBLAZA Ports are the perfect way to deck out your gear with a huge range of accessories, making them attachable and detachable by simply snapping them into place.
$21.99Add to cart
RailBlaza StarPort HD
Many vessels are made to suit the mount base pattern of Scotty, RAM, Cannon, Fish-On, and many others.
Now RAILBLAZA’s original accessories can easily be fitted to these vessels.
After many, many requests we introduced a StarPort to fit straight into this space, the StarPort HD. This is a stylish, four screw base mount, which comes with the popular RAILBLAZA locking slide, and is lower in profile than others on the market.
IMPORTANT: Use of petroleum based lubricants on the StarPort slide will cause failure. Silicone based products are best suited (please check contents of lubricant before using).
TracMount Option
The StarPort HD can also be centrally mounted on many popular track systems, with the added versatility of tool-free adjustment. Just buy our StarPort HD TracMount Kit, and open up the central screw-hole bosses, from underneath, with a drill.
(Not Included with StarPort HD, order separately)
$15.99Add to cart
RailBlaza StarPort Single
Attach all RAILBLAZA accessories to your boat, kayak, or other surface using this accessory mount. The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces.
Are you looking for a way to attach your marine accessories to your boat?
The RAILBLAZA StarPort is a unique and multifunctional mounting bracket for boating accessories, that can be used in a number of different ways. The main purpose of the StarPort is to allow users to fit and swap out our full range of RAILBLAZA accessories onto power boats, inflatables, sail boats, kayaks, ATVs, garages and any other place you wish to place them.
Made from high grade engineering plastics, the StarPort is not only stylish but easy to attach and can be surface or recess mounted. Because it takes all RAILBLAZA accessories and is so versatile, you will struggle to find a way in which the StarPort cannot be used. For example, if you are looking for a system in which you can attach your Rod Holder R or Rod Holder II to a rail then look no further. The StarPort can also be centrally mounted onto many popular track systems simply by adding our StarPort TracMount Kit (sold separately).
RAILBLAZA StarPorts are the easiest way to hold things on your boat, kayak, or any other vessel. With our extensive range of rod holders, drink holders, phone holders, tablet holders, camera and sounder or transducer mounting, navigation lighting, and much more.
IMPORTANT: Use of petroleum based lubricants on the StarPort slide will cause failure. Silicone based products are best suited (please check contents of lubricant before using).
$15.99Select options
RailBlaza StowPod
What do pliers, keys, fishing lures, cellphones, VHFs, binoculars, drink bottles, sunblock and mugs all have in common? The RAILBLAZA StowPod Storage Caddy will hold them all safe and secure.
If you want storage on your pushpit, rail, console, pedestal, inflatable tube, gunwale, or almost any surface, then the StowPod is for you. This unique design incorporates a movable partition, transforming one end to a drink holder, or leaving the entire pod open to hold larger items.
Holds pliers, keys, lures, phones, VHF’s, binoculars, drink bottles, sunblock, mugs & much more…
Movable drink holder partition
Mounts into any vertical or horizontal StarPort or can be permanently fastened in place
Mounts on rails or inflatables by adding other applicable RAILBLAZA mounts
Available in black or white
Easily removed and stowed when not in use or transferred to another position.
$25.99Select options
