Berley Pro Dragonfly 4/5 Fish Finder Visor
No more squinting at your screen! This visor keeps the sun off the screen and helps keep the water off! This sun visor is made to fit the Raymarine Dragonfly series fish finders and is the perfect solution on your kayak or boat. Made in Australia from 2mm ABS plastic. This is a quick install by undoing the existing ball mount and placing the visor in between.
*Fish Finder not Included.
$39.00Add to cart
Berley Pro Elite/Hook 5 Fish Finder Visor
These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning.
Benefits
Reduced Glare
Splash protection
Increased battery life
Screen protection
Made in Australia from black ABS plastic.
This is a 5 minute install using the four stainless steel fasteners provided.
This visor fits the following.
Lowrance Elite 5 HDI
Lowrance Elite 5 DSI
Lowrance Elite 5 Chirp
Lowrance Mark 5
Lowrance Hook 5
Lowrance Hook 5X
Lowrance Elite 5X
*Fish finder is not included*
$39.00Add to cart
BerleyPro Lowrance Elite 5 TI Visor
These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning.
This visor was made to suit the Lowrance Elite 5 TI
Made in Australia from black ABS plastic.
This is a quick install using the four stainless steel fasteners provided.
*Fish finder not included*
$39.00Add to cart
BerleyPro Lowrance Elite/Hook 4 Visor
These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning.
Benefits:
Reduced Glare
Splash protection
Increased battery life
Screen protection
White screen protector fits with this visor
Made in Australia and from black 3mm ABS plastic.
This is a 5 minute install using the two stainless steel fasteners provided.
*Fish Finder not Included*
Compatible With:
Lowrance Elite 4 HDI
Lowrance Elite 4 CHIRP
Lowrance Hook 4
Lowrance Elite 4 DSI
Lowrance Elite 3x
Lowrance Hook 3
$29.00Add to cart
BerleyPro Orb
The BerleyPro Orb is a 12v, 3 piece collapsible light perfect for that boat or kayak. With IP68 LEDs orientated at 360 degrees and angled over head this can be used as either an anchor light or permanent running light on your kayak. Our specific selection of LEDs are bright enough to let you land that tricky fish at night or setup your gear. This light runs on 12v so no more forgetting to charge your battery or paying for expensive smaller batteries as this can be connected in parallel with your fish finder.
This light is easy to install with only 2 wires needing to be connected and it comes with everything you need.
This light includes:
Super bright and waterproof IP68 LEDs
Extremely low current draw at 310mA
Railblaza mounting E port
Stainless steel fasteners
Waterproof fuse holder
3A fuse
3m of twin core marine cable
3 Piece 1.1m tall collapsible light
Glue lined heat shrink for installation
$149.00Add to cart
BerleyPro Raymarine Ready Transducer Mount (Suits Hobie)
The Raymarine Ready transducer mounts are designed to fit in the existing Lowrance Ready location on the base of Hobie® Kayaks. These clamp the Dragonfly transducer onto the mounting plate giving it no chance of falling sideways.
This fits the Raymarine CPT-DVS Transducer
This is made from sturdy ABS plastic and comes with stainless steel fasteners required.
$59.00Add to cart
BerleyPro Side Bro Pair
The Side bro is designed to hold you pliers, scissors, fish grips, small red Plano box and much more. This is a direct replacement for the Hobie® side pockets or any flat surface.
LH and RH in the Side Bros is available.
Product dimensions: 295mm Long x 105mm High x 50mm Deep
Plano box information – Plano Waterproof Stowaway 344
$89.00Add to cart
NRS Neko Knife
Previous
Next
DetailsSpecsReviewsQ & A
Product Details
Unique to other NRS knives, the Neko Knife features a sharp point. This compact, low-profile knife delivers the same versatile performance as our popular Co-Pilot knife with a sleeker profile and a simple friction-release sheath.
A low-profile, friction-release sheath holds the knife securely while allowing for fast one-hand deployment.
The hybrid blade includes a serrated section for quickly cutting rope and webbing, plus a razor-sharp smooth section for finer cutting.
Experienced boater preferences vary between using a pointed or blunt-tipped knife, with both options, we’ll let you be the judge. The sharp point of the Neko knife can pierce through most material, including rubber.
The contoured handle with rubberized grip gives you maximum control of the blade.
The sheath clip attaches firmly to your PFD lash tab.
The integrated bottle opener on the Neko Knife helps you spread good cheer at the end of the day.
$49.95Select options
NRS Skelton Gloves Gray Scale
These ultralight fingerless fishing gloves provide complete sun protection and improved grip without overheating your hands or limiting your dexterity.
Our H2Core™ Rashguard material breathes freely, wicks moisture and delivers UPF 50+ protection from the sun’s harmful rays.
Open-finger design allows maximum dexterity for tying on flies and lures.
Amara® synthetic leather patches on 1st and 2nd fingers take the abrasion while stripping line.
Silicone dots on palms provide excellent grip.
Pairing snaps on the cuffs help you keep the gloves together.
$19.95Select options
NRS Fishing Tool Retractor
Keep your line snips, forceps or other lightweight fishing tools handy with the NRS Fishing Tool Retractor. No fumbling in pockets and no dropping that essential tool in the water!
Sturdy spring clip slips securely over an attachment loop, accessory D-ring or lash tab on your life jacket or fly vest.
Also works perfectly with the special retractor holster on the NRS Chinook PFD.
The plastic spring coil extends up to 36″, then zips the tool back into place for the next use.
Once you’ve tried the Tool Retractor, you’ll wonder how you ever fished without it!
$14.59Add to cart
RailBlaza Rod Holer II
The Rod Holder II is robust, versatile, and value for money, it will hold your rod, you choose which position.
Rotating collar helps reduce ‘strike-theft’
Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through
Fully adjustable 360° around, over 90° vertical
Easy access to reel when in position
Square-tooth adjustable tilt stops rotational slipping.
The Rod Holder II is available either as a kit complete with a StarPort, or as a Rod Holder by itself.
For spinning reels, bait casting reels, boat reels, fly reels. Allows you to fit your Rod Holder to any StarPort, SidePort, RailMount or RIBPort.
When finished fishing for the day, remove from StarPort and stow in dry place, do not store wet.
NOTE: We strongly recommend that you tether your fishing rod to the boat while in use. Loss of fishing rods while using the RAILBLAZA Rod Holder is not covered by warranty.
$24.99Add to cart
RailBlaza StarPort HD
Many vessels are made to suit the mount base pattern of Scotty, RAM, Cannon, Fish-On, and many others.
Now RAILBLAZA’s original accessories can easily be fitted to these vessels.
After many, many requests we introduced a StarPort to fit straight into this space, the StarPort HD. This is a stylish, four screw base mount, which comes with the popular RAILBLAZA locking slide, and is lower in profile than others on the market.
IMPORTANT: Use of petroleum based lubricants on the StarPort slide will cause failure. Silicone based products are best suited (please check contents of lubricant before using).
TracMount Option
The StarPort HD can also be centrally mounted on many popular track systems, with the added versatility of tool-free adjustment. Just buy our StarPort HD TracMount Kit, and open up the central screw-hole bosses, from underneath, with a drill.
(Not Included with StarPort HD, order separately)
$15.99Add to cart
YakAttack AR Tube
The YakAttack Advanced Rod Tube™, new for 2019, is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust through its patented pending design.
The AR Tube attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
– From locked mode, simply squeeze a lever to go into adjustment mode.
– In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
– To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
$40.00Add to cart
YakAttack Lowrance Fish Finder Mount
No more ball mounts, no more slipping or rotating in the track. Designed to replace the factory base on Lowrance fishfinders, the Lowrance Fishfinder Mount is a simple, clean, and highly effective solution for mounting your fishfinder. Attaches to track using our new LockNLoad™ mounting system for maximum versatility. This mount fits the popular Lowrance Elite, Hook, and Elite Ti models of fishfinders. The LockNLoad track mount is compatible with all YakAttack GearTrac, YakAttack MightyMount XL, and most other factory installed kayak track systems. Not Compatible with Hook2Serie. Patent pending. Fish finder not included.
$40.00Add to cart
YakAttack Omega Pro Universal Fishing Rod Holder
The slogan for our new Omega series rod holders is “The last rod holder you’ll ever need” and that’s exactly what we have developed. This is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security.
The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts.
The Omega Pro attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
– From locked mode, simply squeeze a lever to go into adjustment mode.
– In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
– To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018.
$40.00Add to cart
YakAttack Rectangular Fish Finder Mount
No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system, this is the cleanest and most secure mounting solution for larger Lowrance, Garmin, and Raymarine units featuring a gimbal mount such as the Lowrance Hook2 7, Garmin Striker 9sv, and the Raymarine Axion 7. Features the LockNLoad mounting system offering ultra secure attachment to YakAttack GearTrac, Mighty Mount II, MightyMount XL, and most other factory-installed kayak track systems. Hardware included.
$45.00Add to cart
